View CXM3582UR_2775842.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 sp10t antenna switch module 6trx/2tx/2rx CXM3582UR description the CXM3582UR is a sp10t antenna switch module for gsm/umts/cdma/lte multi-mode handset. the CXM3582UR has a built-in dual low pass filter and a +1.8 v cmos compatible decoder. the sony gaas junction gate phemt (jphemt) mmic process is used for low insertion loss and high linearity. the device has low bom with no dc blocking capacitor. (applications: gsm/umts/cdma/lte multi-mode handsets) features low insertion loss: 0.45 db (typ.) trx (cellular band) 0.60 db (typ.) trx (imt tx band) high linearity: iip3 = 68 dbm battery direct operation: v dd = 2.5 v to 5.0 v no dc blocking capacitors except sourcing dc bias small package size: 26-pin uqfn (2.6 mm x 3.4 mm x 0.6 mm max.) lead-free and rohs compliant structure gaas junction gate phemt (jphemt) mmic switch, cmos decoder absolute maximum ratings bias voltage v dd 6 v (ta = 25 c) control voltage v ctl 4 v (ta = 25 c) input power max. [tx1] 36 dbm (duty cycle = 12.5 % to 50 %) (ta = 25 c) input power max. [tx2] 34 dbm (duty cycle = 12.5 % to 50 %) (ta = 25 c) input power max. [trx] 32 dbm (ta = 25 c) input power max. [rx] 13 dbm (ta = 25 c) operating temperature ?35 to +90 c storage temperature ?65 to +150 c gaas mmic?s are esd sensitive devices. sp ecial handling precautions are required. www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 2 block diagram of sp10t antenna switch module www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 3 block diagram of sp10t 6trx/2tx/2rx truth table state active path ctl state sw state (*1) ctla ctlb ctlc ctld f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 f16 f17 f18 f19 f20 1 trx1 l l h l h l l llllll l l h h h h h h h h h 2 trx2 h l h l l h l llllll l hl h h h h h h h h 3 trx3 h h h l l l h llllll l h hl h h h h h h h 4 trx4 h l h h l l l hlllll l h h hl h h h h h h 5 trx5 h h h h l l l l hllll l h h h h l h h h h h 6 trx6 h l l h l l l l l hlll l h h h h h l h h h h 7 rx1 l h h l l l l l l l hll l h h h h h h l h h h 8 rx2 l h l l l l l l l l l hl l h h h h h h h l h h 9 tx1 h h l l l l l l l l l l hl h h h h h h h hl h 10 tx2 h l l l l l l l l l l l l h h h h h h h h h hl 11 idle (*2) l l l l ? ? ??????? ? ? ? ? ? ? ? ? ? ? ? (*1) state ?l? means a switch ?off? , state ?h? means a switch ?on? (*2) state ?idle? means that the dc/dc converter is ?off?, and the switch paths are in an undefined state. www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 4 pin configuration of sp10t ctla ctlb ctlc ctld v dd 6 4 5 gnd gnd gnd 9 3 1 2 10 11 12 13 16 18 17 19 21 20 26 25 24 23 22 gnd rx2 gnd rx1 trx1 trx2 trx3 gnd uqfn-26p pkg (2.6 mm 3.4 mm 0.6 mm max.) top view 8 7 14 15 gnd ant gnd gnd trx6 trx5 trx4 gnd tx1 tx2 dc bias condition (ta = 25 c) parameter min. typ. max. unit v dd +2.5 +2.8 +5.0 v v ctl (h) +1.35 +1.8 +3.1 v v ctl (l) 0 ? +0.45 v www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 5 target specification (v dd = 2.5 v, ta = 25 c) item symbol path condition min. typ. max. unit insertion loss il ant - trx1 *1, *2, *3, *10 ? 0.48 0.58 db *4, *11 ? 0.65 0.80 *5 ? 0.69 0.84 ant - trx2 *1, *2, *3, *10 ? 0.46 0.56 *4, *11 ? 0.63 0.78 *5 ? 0.70 0.85 ant - trx3 *1, *2, *3, *10 ? 0.40 0.50 *4, *11 ? 0.54 0.69 *5 ? 0.58 0.73 ant - trx4 *1, *2, *3, *10 ? 0.39 0.49 *4, *11 ? 0.49 0.64 *5 ? 0.51 0.66 ant - trx5 *1, *2, *3, *10 ? 0.44 0.54 *4, *11 ? 0.60 0.75 *5 ? 0.66 0.81 *6 ? 0.75 0.95 *7 ? 0.96 1.16 ant - trx6 *1, *2, *3, *10 ? 0.45 0.55 *4, *11 ? 0.69 0.84 *5 ? 0.75 0.90 ant - tx1 *8 ? 1.10 1.20 ant - tx2 *9 ? 1.20 1.35 ant - rx1, 2 *10 ? 0.80 0.90 *11 ? 0.99 1.14 vswr vswr all ports in active paths 600 to 2170 mhz ? ? 1.50 ? harmonics 2fo ant - trx1, 2, 3, 4, 5, 6 *3, *4 ? ? ?40 dbm 3fo ? ? ?40 2fo ant - trx4 *2, *12b ? ? ?78 2fo ant - tx1 *8 ? ? ?36 3fo ? ? ?36 2fo ant - tx2 *9 ? ? ?36 3fo ? ? ?36 attenuation att tx1 - ant 1648 to 1805 mhz 25 ? ? db 1805 to 1830 mhz 30 ? ? 2472 to 2745 mhz 25 ? ? 3296 to 10000 mhz 20 ? ? 10000 to 12750 mhz 15 ? ? tx2 - ant 3420 to 3820 mhz 25 ? ? 5130 to 5730 mhz 25 ? ? 6840 to 12750 mhz 20 ? ? inter modulation product power in rx band imd2 ant - trx1, 2, 3, 4, 5 ,6 *12a, 13, 14, 17, 18, 21, 22 ? ? ?105 dbm imd3 *12a, 15, 16, 19, 20, 23, 24 ? ? ?105 input ip3 iip3 ant - trx1, 2, 3, 4, 5, 6 *12a, 25, 26 ? 68 ? switching time ts active mode 50 % ctl to 90 % rf ? 3 5 s wake up time tw wake up time from idle mode to active mode ? 30 50 s control current ictl v ctl = 1.80 v ? 1 5 a supply current i dd active mode v dd = 2.8 v ? 0.22 0.4 ma supply current i dd idle mode v dd = 2.8 v ? ? 20 a www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 6 item symbol path condition min. typ. max. unit isolation iso tx1 - trx1, 2, 3, 4, 5, 6, rx1, 2 *8 (tx1 active) 40 ? ? db tx2 - trx1, 2, 3, 4, 5, 6 *9 (tx2 active) 32 ? ? tx2 - rx1, 2 40 ? ? trx1, 2, 3 - trx4, 5, 6 *1, *2, *3, *10 (trx1, 2, 3, 4, 5, 6 active) 40 ? ? trx1, 2, 3 - trx4, 5, 6 *4, *5, *11 (trx1, 2, 3, 4, 5, 6 active) 30 ? ? trx5 - trx1, 2, 3 *6, *7 (trx5 active) 25 ? ? trx1 - trx2 *1, *2, *3, *10 (trx1, 2 active) 30 ? ? trx1 - trx2 *4, *5, *11 (trx1, 2 active) 18 ? ? trx1 - trx3 *1, *2, *3, *10 (trx1, 3 active) 40 ? ? trx1 - trx3 *4, *5, *11 (trx1, 3 active) 20 ? ? trx2 - trx3 *1, *2, *3, *10 (trx2, 3 active) 25 ? ? trx2 - trx3 *4, *5, *11 (trx2, 3 active) 15 ? ? trx4 - trx5 *1, *2, *3, *10 (trx4, 5 active) 30 ? ? trx4 - trx5 *4, *5, *11 (trx4, 5 active) 21 ? ? trx4 - trx5 *6, *7 (trx5 active) 15 ? ? trx4 - trx6 *1, *2, *3, *10 (trx4, 6 active) 40 ? ? trx4 - trx6 *4, *5, *11 (trx4, 6 active) 26 ? ? trx5 - trx6 *1, *2, *3, *10 (trx5, 6 active) 30 ? ? trx5 - trx6 *4, *5, *11 (trx5, 6 active) 24 ? ? trx5 - trx6 *6, *7 (trx5 active) 17 ? ? rx1 - rx2 *11 (rx1, 2 active) 33 ? ? electrical characteristics are measured with all rf ports terminated in 50 ? . corresponding band of trx (umts/cdma/gsm) *1 pin = 26 dbm, 452 to 468 mhz (band class 5) *2 pin = 25 dbm, 704 to 787 mhz (band 13, band 17) *3 pin = 26 dbm, 824 to 960 mhz (band 5, band 8) *4 pin = 26 dbm, 1710 to 1990 mhz (band 1 tx, band 2 tx, band 3 tx, band 4 tx) *5 pin = 10 dbm, 2110 to 2170 mhz (band 1 rx, band 4 rx) *6 pin = 26 dbm, 2300 to 2400 mhz (band 40) *7 pin = 26 dbm, 2500 to 2690 mhz (band 7) *8 pin = 35 dbm, 824 to 915 mhz (gsm850/900 tx) *9 pin = 32 dbm, 1710 to 1910 mhz (gsm1800/1900 tx) *10 pin = 10 dbm, 869 to 960 mhz (gsm850/900 rx) *11 pin = 10 dbm, 1805 to 1990 mhz (gsm1800/1900 rx) *12a measured with the recommended circuit 1, 2 *12b measured with the recommended circuit 3 www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 7 imd condition band frx on trx ftx +20 dbm on trx fblocker ?15 dbm on ant imd condition band i 2140 mhz 1950 mhz imd2 (frx ? ftx) 190 mhz *13 imd2 (frx + ftx) 4090 mhz *14 imd3 (2ftx ? frx) 1760 mhz *15 imd3 (2ftx + frx) 6040 mhz *16 band ii 1960 mhz 1880 mhz imd2 (frx ? ftx) 80 mhz *17 imd2 (frx + ftx) 3840 mhz *18 imd3 (2ftx ? frx) 1800 mhz *19 imd3 (2ftx + frx) 5720 mhz *20 band v 880 mhz 835 mhz imd2 (frx ? ftx) 45 mhz *21 imd2 (frx + ftx) 1715 mhz *22 imd3 (2ftx ? frx) 790 mhz *23 imd3 (2ftx + frx) 2550 mhz *24 iip3 condition band f1 +27 dbm on trx f2 +27 dbm on trx iip3 condition iip3 = (3 * pout ? im3)/2 band i 1950 mhz 1951mhz *25 band v 835 mhz 836mhz *26 electrical characteristics are measured with all rf ports terminated in 50 ? . measured with the recommended circuit. www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 8 target specification of triple beat ratio (v dd = 2.5v, ta = 25 c) item symbol path condition min. typ. max. unit tx1 at trx* 21.5dbm tx2 at trx* 21.5dbm jammer at ant ?30 dbm triple beat product at trx* triple beat ratio tbr ant - trx1, 2, 3, 4, 5, 6 835.5 mhz 836.5 mhz 881.5 mhz 881.5 1 mhz 81 ? ? dbc 1880 mhz 1881 mhz 1960 mhz 1960 1 mhz 81 ? ? electrical characteristics are measured with all rf ports terminated in 50 ? . measured with the recommended circuit target specification of input ip2 (v dd = 2.5 v, ta = 25 c) item symbol path condition min. typ. max. unit tx at trx* 24 dbm jammer at ant ?20 dbm im2 product at trx* input ip2 iip2 ant - trx1, 2, 3, 4, 5, 6 836.61 1718.61 881.61 113.5 ? ? dbm 836.61 45 881.61 95.5 ? ? 1885 3850 1965 95.5 ? ? 1885 80 1965 95.5 ? ? 1732.5 3865 2132.5 95.5 ? ? 1732.5 400 2132.5 95.5 ? ? electrical characteristics are measured with all rf ports terminated in 50 ? . measured with the recommended circuit www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 9 recommended circuit 1 operation frequency range: 0.7-2.7 ghz c 2 c 1 l 1 ctla ctlb ctlc ctld v dd 6 4 5 9 3 1 2 10 11 12 13 16 18 17 19 21 20 26 25 24 23 22 top view 8 7 14 15 gnd gnd gnd gnd rx2 gnd rx1 trx1 trx2 trx3 gnd uqfn-26p pkg (2.6 mm 3.4 mm 0.6 mm max.) gnd ant gnd gnd trx6 trx5 trx4 gnd tx1 tx2 *1: no dc blocking capacitors are required on all rf ports. (except sourcing dc bias) *2: dc levels of all rf ports are gnd. *3: l1 (22 nh) and c1 (22 pf) are recommended on ant port for esd protection. *4: c2 capacitor (100 pf) is recommended. *5: trx5 is recommended for band7. www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 10 recommended circuit 2 operation frequency range: 0.45-2.7 ghz c 2 c 1 l 1 ctla ctlb ctlc ctld v dd 6 4 5 9 3 1 2 10 11 12 13 16 18 17 19 21 20 26 25 24 23 22 top view 8 7 14 15 gnd gnd gnd gnd rx2 gnd rx1 trx1 trx2 trx3 gnd uqfn-26p pkg (2.6 mm 3.4 mm 0.6 mm max.) gnd ant gnd gnd trx6 trx5 trx4 gnd tx1 tx2 l 2 l 2 l 2 l 2 l 2 l 2 *1: no dc blocking capacitors are required on all rf ports. (except sourcing dc bias) *2: dc levels of all rf ports are gnd. *3: l1 (47 nh) and c1 (22 pf) are recommended on ant port for esd protection. *4: c2 capacitor (100 pf) is recommended. *5: trx5 is recommended for band7. *6: l2 (12 nh) is recommended on a trx port assigned for band i to improve imd2 performance. (rx-tx (190 mhz)) www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 11 recommended circuit 3 2nd harmonics improvement at lte (band13) c 2 c 1 l 1 l 2 ctla ctlb ctlc ctld v dd 6 4 5 9 3 1 2 10 11 12 13 16 18 17 19 21 20 26 25 24 23 22 top view 8 7 14 15 gnd gnd gnd gnd rx2 gnd rx1 trx1 trx2 trx3 gnd uqfn-26p pkg (2.6 mm 3.4 mm 0.6 mm max.) gnd ant gnd gnd trx6 trx5 trx4 gnd tx1 tx2 c 3 *1: no dc blocking capacitors are required on all rf ports. (except sourcing dc bias) *2: dc levels of all rf ports are gnd. *3: l1 (47 nh) and c1(22 pf) are recommended on ant port for esd protection. *4: c2 capacitor (100 pf) is recommended. *5: trx5 is recommended for band7. *6: l2 (1.8 nh) and c3 (4.0 pf) are recommended when trx4 is assigned for band 13. www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 12 recommended land pattern 0.6 0.2 0.1 0.16 0.21 0.15 0.4 0.3 1.2 1.5 0.8 3.6 3.4 (pkg line) 2.6 (pkg line) 2.8 0.25 0.1 0.2 2.5 (*) 1.7 (*) a r0.05 (mask) detail a pkg line *1: gnd plane is recommended. : land : mask (open area) : resist (open area) : metal area in board (*1) * metal mask thickness: 110 m pkg: 3.4 mm x 2.6 mm pin pitch: 0.4 mm uqfn-26p-01 macro drawing (reference) pcb design for uqfn-26p gnd via hole pkg line 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 13 package outline (unit: mm) www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 14 marking www.datasheet.co.kr datasheet pdf - http://www..net/
CXM3582UR 15 note sony reserves the right to change products and specifications without prior notice. this information does not convey any license by any implic ation or otherwise under any patents or other right. application circuits shown, if any, are typical examples il lustrating the operation of the devices. sony cannot assume responsibility for any problems arisin g out of the use of these circuits. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of CXM3582UR

	To Download CXM3582UR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .